back to New Shadehouse" index   back to page 2 shade house design criteria go to page 4 shadehouse component specifications
____________________________________________________________________________
 
this page
this page
.
ROTARY TREES FOR 2000 CONSTRUCTION MATERIALS
           
Qty
Description
Length
Item #
Check
.
4
Corner Posts
2600
(1)
.
post
type
2
Side, Intermediate Posts
2500
(2)
.
.
6
Back, centre, gate, intermediate posts
2525
(3)
.
.
.
.
RAILS
.
.
.
3
Back, centre, front, top rails
2380
(4)
.
.
2
Side, top rails
2800
(5)
.
.
2
Roof, top rails
1420
(6)
.
.
4
Side, bottom rails
1410
(7)
.
..
1
Back, centre bottom rails
1055
(8)
.
.
4
Back, front, bottom rails
600
(9)
.
.
FITTINGS / FASTENERS

Posts and rails are of 25 n.b. gal extra light guage. Dipped inside and out for extra durability.

Other type - "gal tube plus" only galvanised on the outside - not inside - therefore less durable.

4
Caps K25 (Corner Posts only)
5
Cross X2525
10
Corner C2525
22
Tee T2525
12
Flanges F25 (Welded to posts at factory) sketch
2
Hinges H2525
24
Dyna Bolts, 10 o x 48 (not used for posts in grounds)
100
Cable Ties (to fasten Shade Cloth)
5kg
Lacing Wire 1.57 Hvy Galv
.
GATE
1
Approx. 1040 x 1980 covered at Factory
.
SHELVES
2
Shelves 600 wide x 3000
.
COVERINGS
10M
Chainwire 2000 wide x Hvy Gal (for Perimeter)
3M
Chainwire 2400 wide x Hvy Galv (for roof)
1
Shade Cloth envelop to Cover Frame Assembly
1
Shade Cloth Gate Cover Prefitted to Gate
.
ASSEMBLY
11
Assembly Instructions and Illustrations
1
Photocopy of Typical Assembled Unit
..
____________________________________________________________________________
top of page